Radwag PUE C41H Indicator Manuel d'utilisateur télécharger pdf (Page 136)

27.7. RS485 led out via RS 1D gland

A version with the RS485 interface led out via a gland (in the standard

solution RS485 is present in a socket). A 3m cable is led out through

the gland.

27.7.1. Installing inside the PUE C41H housing

1. Unplug the scale from mains;

2. Unscrew and take off the back wall of the housing;

3. Unplug one of the unused glands and led out the PT0012

cable through it;

4. Connect the PT0012 cable to the J20 connector (ARK type)

on the main board of PUE C41H:

- 136 -

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 162 163

Pas de commentaire

Radwag PUE C41H Indicator Manuel d'utilisateur Page 136