Radwag PUE C41H Indicator Manuel d'utilisateur télécharger pdf (Page 124)

Installing procedure:

1. Unplug the scale from mains;

2. Unscrew and take off the back wall of the housing;

3. Install your module in J3 on the main board;

4. During installation turn your attention to plastic columns. They

should be placed one side in mounting holes in the main board

and the other side in the mounted module PK1;

5. Led the PT0016 cable through one of plugged glands;

6. Connect the PT0016 cable to J2 connector on the PCB according

to the description below;

7. The cable connect to the group of wires (unhook band clips

fastening the group of wires, lay the cable and hook the band clips).

Band clips of multiple usage;

8. Screw down the back wall.

Installing a PK1 module on the main board of PUE C41H

- 124 -

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 162 163

Pas de commentaire

Radwag PUE C41H Indicator Manuel d'utilisateur Page 124