Radwag BALANCES 3Y SERIES Manuel d'utilisateur télécharger pdf (Page 17)

- 17 -

4. Remove the weighing pan and the pan shield so as not to damage the

mechanism while carrying out the cleaning process.

Thus prepared draft shield and its glass parts may be thoroughly cleaned. Carry

out the cleaning process carefully using the most gentle movements. Pay attention

to dirt and any small items, they could affect balance operation if they got inside

the balance through the opening that serves to mount the weighing pan.

Upon completion of the cleaning process assembly the balance, take actions like

before but in a reverse order. Pay a special attention to left and right side glass,

assembly it on the correct side of the balance. While sliding the glass back onto its

place remember to pull the protection (like before when dismantling the draft

shield).

XA 3Y series balance

Steps:

1. Unscrew and remove top glass protection, next slide the top glass out.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 245 246

Pas de commentaire

Radwag BALANCES 3Y SERIES Manuel d'utilisateur Page 17