Radwag MYA 5.3Y.F1 Microbalance Manuel d'utilisateur télécharger pdf (Page 59)

- 59 -

16.9. Dosing function in parts counting mode

Parts counting process can be aided by dosing function, i.e. control whether

indication does not exceed set target value.

Dosing requires setting a value, which is the target, for instance 100 parts,

and percent tolerance from the target value. The target value is displayed as a

bracket on a bargraph.

Defining the value of target mass is carried out using a quick access key <

Target Value>.

Procedure

• Press grey coloured workspace and press option <Information>

• Set Bargraph option to YES, return to parts counting mode

• Press grey coloured workspace and press option <Keys>

• Assign <Target Value> option to one of the quick access keys displayed in

the bottom bar

• Return to parts counting mode

• Press < Target Value > key and insert number of parts recognized as

the target value,

• If tolerance applies, set its value (range between 0 – 100%)

• Under the measurement result there is bargraph displayed, containing:

o Current number of parts on the weighing pan (marked with colours –

see point 16.7.)

o The value of Target Mass (black marker)

Caution:

The checkweighing and dosing functions can operate simultaneously in the parts

counting mode. In such case the dosing tolerance is controlled by Lo and Hi

thresholds of the checkweighing function.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 197 198

Pas de commentaire

Radwag MYA 5.3Y.F1 Microbalance Manuel d'utilisateur Page 59