RADWAG WPW/E/H Manuel d'utilisateur télécharger pdf (Page 170)

- 170 -

Scale type:

WPW/E

150 H5/K

WPW/E

300 H5/K

WPW/E

60 H5/K

WPW/E

150 H6/K

WPW/E

300 H6/K

Max capacity 150kg 300kg 60kg 150kg 300kg

Readability 50g 100g 20g 50g 100g

Tare range -150kg -300kg -60kg -150kg -300kg

Pan size 600 × 600mm 800 × 800mm

Work temperature - 10°C to +40°C

Interfaces RS 232, RS 485

Ingress protection rating IP 66/67

Power supply 85-265V AC 50Hz and internal accumulator 6V

Battery operation time Up to 9h

Display LCD with backlight

32. APPENDIX

32.1. Communication with barcode scanners

1. For communication with barcode scanners RADWAG scales use

RS232 interfaces and simplex transmission (one direction) without

handshaking. Only two wires are required for assuring such a

transmission. Used scanners should be equipped in such interface

with disabled both hardware and software handshaking.

2. Both scales and scanners have the possibility of setting of

transmission parameters. Both devices are required to have

the same parameters set : baud rate, number of data bits,

parity control, stop bits. e.g. 9600,8,N,1 – baud rate 9600 bit/s,

data 8-bits, no parity control, 1 stop bit.

3. Barcode scanners can send additional information apart from the

expected barcode e.g. symbology (type of barcode). It is advisable

to disable such information because RADWAG devices and

software do not use it.

4. Some RADWAG systems can omit unnecessary information by

using parameters that mark the beginning and the length of the

code required to analyse.

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 185 186

Chrisgaipt 12 Apr 2024 | 01:51:29

Hello, im noob :)

RADWAG WPW/E/H Manuel d'utilisateur Page 170